CHARGERS & BALANCERS - מטענים ובלאנסרים

Thunder Power Charger - TP-1010C

The 1010c is amongst the most capable battery charge/maintenance systems available. Capable of up to 10S LiPo and A123 cells, 30 NiCd/MH cells and 24v Pb, it can charge, discharge and cycle batteries and report back full data. It is capable of up to 10 amps (220 watts total) for charging and 2 amps while discharging. And, of course, it can do all this while connected to either a 205V or 210V balancer for “feedback charge/balancing” safety and long battery life.

Thunder Power Charger - TP-610C

610C Charger with Built-in Balancer

TP610C 1 to 6-Cell LiPo and A123 cells, 14 NiCd/MH cells and 6-12V Pb, it can charge, Balance, discharge and cycle batteries and report back full data. It is capable of up to 10 amps (80 watts total) for charging.

Thunder Power Charger - TP-535

1-5 Li-Poly cells, Up to 3.5Ah Commmunication port for TP balancer

Thunder Power Charger - TP-425C

Thunder Power Lithium Polymer Charger for 1 to 4 cell: 300, 500, 800, 1300, 2000 and 2500 mAh settings

Thunder Power - TP-205V Balancer

2-5 cell Smart balancer Auto balance (active if more than 0.005V imbalance) Over voltage safety alerts (also shut-off TP charger if detected any 4.3V cell during charging)

Thunder Power - TP-210V Balancer

2-10 cell Smart balancer Auto balance (active if more than 0.005V imbalance) Over voltage safety alerts (also shut-off TP charger if detected any 4.3V cell during charging)